1 Clicking on this button will close this dialog box.
2 Clicking on this button will close this dialog box without accepting the current options.
128 Xara 3D\n\nX3D\nXara 3D (*.X3D)\n.X3D\nX3D.Document\nX3D Document
129 X3D
142 Edit extrusion options\nExtrusion options
152 Edit bevel options\nBevel options
1000 Enter the hue value. This should be an angle from 0░ to 360░. The primary colors are red at 0░, yellow at 60░, green at 120░, cyan at 180░, blue at 240░, magenta at 300░ and red again at 360░.
1001 Enter the saturation value. This is the percentage of white that should be added to the color.
1002 Enter the value. This is the percentage of black that should be added to the color.
1003 This panel shows the currently selected color.
1004 Drag the cross left and right to alter the hue. Click to set the cross at a particular position.
1005 Drag the cross around to set saturation and value. Click to set the cross at a particular position.
1015 Enter the amount of red. This should be a value in the range of 0 to 255.
1016 Enter the amount of green. This should be a value in the range of 0 to 255.
1017 Enter the amount of blue. This should be a value in the range of 0 to 255.
1037 Select the required font.
1042 This will set the current font aspect ratio ie the ratio of the character width to character height. The value should be in the range 10% to 1000%. The default is 100%.
1048 This will set the font style to be bold, but only if such a style exists for this font.
1049 This will set the font style to be italic or oblique.
1051 This panel shows the required text in the current font style.
1056 Enter the required text here. This should be a maximum of 50 characters.
1057 This sets the depth of the extruded text. The maximum depth is 1000.
1058 Clear this to prevent the front face from being displayed.
1059 Clear this to prevent the back face from being displayed.
1060 The outside edges may be rounded or mitered. Note that the edges affected are those around the circumference of the object. The front and back edges are altered by selecting the various bevel styles.
1061 The outside edges may be rounded or mitered. Note that the edges affected are those around the circumference of the object. The front and back edges are altered by selecting the various bevel styles.
1063 This affects the shape of the bevel. Higher values give a bevel that will protrude more and may create an object where the text becomes unreadable. The maximum depth is 1000.
1068 Select the bevel shape. This will alter the shape of the side faces and the edges of the front and back faces.
1076 This will alter the text color. Note that its appearance is also affected by the current lighting eg a yellow object with a cyan light will appear green and with a blue light it will be black.
1079 Set for a dull non-reflecting surface.
1080 Set for a shiny surface with highlights.
1081 The animation will be played back at this rate. The lower the value, the longer the animation will be. Too high a value may create an animation that is too fast to be played back without skipping frames. Too low a value will create a jerky animation.
1083 Rotate the text in a clockwise or counterclockwise direction.
1085 The image will be saved with a default palette.
1086 Saves the image with a palette optimized for that image.
1087 The image may be saved without dithering. This may result in an image with banding of colours, but, if compression is used, the image will compress better.
1088 The image may be saved using ordered dither.
1089 The image may be saved using diffused dither. This will give the best image results, but the background may appear to judder between frames when animated.
1091 Sets the color depth to 8 bits per pixel ie up to 256 colors.
1092 Sets the color depth to 16 bits per pixel ie up to 65536 colors.
1093 Sets the color depth to 24 bits per pixel.
1096 The picture will be created just large enough to contain the image at its current size.
1097 This is a percentage with 0% the lowest quality, and 100% the highest quality.
1098 Sets the color depth to 4 bits per pixel ie 16 colors.
1102 Compressed images will be much smaller than uncompressed images, but the image quality may be much lower.
1103 As the text rotates, only the front face will be shown, hence the text will always read correctly and will not appear reversed. This may cause the text to jump as its direction is changed.
1108 Set this option to make the background of the image transparent.
1115 If this option is set, then each frame of the animation will have a separate optimized palette, otherwise a single palette will be used for the whole animation. Having a single palette results in smaller files, but a palette per frame results in higher quality images.
1116 Set this option if the image is to use an optimized palette.
1124 When an interlaced file is loaded into an application which supports interlacing, the picture will first appear as a low resolution image and then with increasing resolution as more of the file is loaded. This technique is used commonly on the Web to improve the appearance of bitmaps as they are downloaded. If you do not use interlacing, the picture will only be displayed when the whole image has been downloaded.
1125 Click to select the HSV color model.
1126 Click to select the RGB color model.
2000 Failed to open '%1'
2001 Failed to save to '%1'
2002 '%1' is not a valid X3D file
2003 '%1' is not a valid bitmap file
2004 '%1' does not contain a bitmap.
2005 X3D has failed and no image can currently be displayed.\nTry undoing any recent changes you have made.
2006 Failed to export to '%1'
2007 Access to Xara web site failed
2008 X3D has failed due to lack of memory. Try closing down other applications.\nNo image will be displayed until sufficient memory is available.
2009 X3D has failed and no image can currently be displayed.\nTry undoing any recent changes you have made.\n\nError code : %1
3000 Drag arrow to alter lighting, double click to alter color
3001 Drag to rotate the text, double click to alter the text color
3002 Drag to rotate the text, double click to alter the background color
3003 You have %1 remaining of your demonstration period. If you would you like to purchase and unlock the program press 'Purchase'. If you are an existing owner and find you need a new unlock code press 'Purchase' to obtain a free new unlock code.
3005 You entered an invalid unlock code.\nThe program has not been unlocked.
3006 Sorry, you cannot alter the background\nwhen in demonstration mode.
3007 The program has been corrupted,\nhence it will now terminate immediately.
3008 Sorry, you cannot export transparent GIFs\nwhen in demonstration mode.
